PT100 output surface temperature sensor for mine magnetic installation

Product Overview:HTP150 surface temperature sensor is a PT100 temperature sensor, can be used for underground coal mine, detection of motor, reducer surface temperature, and other mechanical, electrical equipment surface temperature.The sensor adopts four-wire resistance signal output, which can meet the requirements of tem

Featured Products

Product Overview:

HTP150 surface temperature sensor is a PT100 temperature sensor, can be used for underground coal mine, detection of motor, reducer surface temperature, and other mechanical, electrical equipment surface temperature.The sensor adopts four-wire resistance signal output, which can meet the requirements of temperature measuring instruments using two-wire, three-wire or four-wire system.

Parameters:

Temperature range:0~150ºC
Measurement error: ± 1.5 Ω;

The output signal: PT100 (100.0 ~ 157.33 Ω);
The sensor does not need to be connected to the power supply;
Ambient temperature: 0~40ºC;
Relative humidity: not more than 98% (refer to 25ºC);
Atmospheric pressure: 80~106kPa;
Where there is no significant vibration and shock
Underground coal mine methane, coal dust explosive mixture, but no damage to the insulation of corrosive gas, no water, no water occasions;
Dimensions: 45mm*15mm*15mm
Weight: 86 g


Structure Drawings:


Magnetic Mount PT100 Output Surface Temperature Sensor For Mine
Operating Principle:

Pouring and armoured PT100 temperature measuring element inside the sensor reflects the actual temperature on the surface of the device under test by using the characteristic that PT100 linearly changes its resistance value with temperature change.When the sensor is placed on the surface of the device to be measured, the temperature of the measured surface is transmitted to the internal temperature measuring element, thereby changing the resistance value of the temperature measuring element. By measuring the resistance value of the temperature measuring element, the temperature of the device to be measured is indirectly measured.

Method of Application:

1.Sensor Installation
The temperature sensor should be installed as far as possible in the place where coal, water and other objects can not be splashed. It should be closely installed on the surface of the device under test through bolts, and the lower surface of the sensor should be completely in contact with the surface under test.The tail signal lead line should be well protected, can not be accepted, so as not to damage the internal lead.

Magnetic Mount PT100 Output Surface Temperature Sensor For Mine
2.Sensor Connection
The sensor is equipped with four-core shielded cable leads, two red and two white. The two red wires are connected together internally, and the two white wires are connected together internally.The sensor adopts the four-wire output form, which can be conveniently connected with the secondary instruments using the two-wire, three-wire and four-wire connection methods.
Magnetic Mount PT100 Output Surface Temperature Sensor For MineMagnetic Mount PT100 Output Surface Temperature Sensor For Mine

Related Products:

Magnetic Mount PT100 Output Surface Temperature Sensor For Mine


Magnetic Mount PT100 Output Surface Temperature Sensor For Mine

Magnetic Mount PT100 Output Surface Temperature Sensor For Mine
Magnetic Mount PT100 Output Surface Temperature Sensor For Mine


Certification:
Magnetic Mount PT100 Output Surface Temperature Sensor For Mine




FAQ:

1.    Q: Are you manufacturer or trading company?
        A: We are manufacturer which focuses on sensor for 10 years.

2.    Q: What's your quality control system?
        A: MC, ISO9001, CE Certificated.

3.    Q: What is the warranty of your products?
        A: Our warranty time is 18 months after shipment.
 
4.     Q: What is lead time of your product?
         A: Normally, our factory lead time is within 10~15 working days for products without customization. You can also check lead time detail with our sales depending on different items.
 
5.     Q: Do you provide customized products?
         A: Yes, we can laser mark your logo on products; OEM and ODM customization are welcomed.
 
6.     Q: What is your MOQ?
        A: We have no MOQ limit, small quantity order is acceptable.
 
7.      Q: What's the transport?                                                              
        A: Express such as DHL, FedEx, TNT, UPS for freight prepaid; and we can also use your own courier account to do the freight collect. For more goods we can arrange by air or by Sea.
 
8.      Q: What is your terms of payment ?
           A: We could accept T/T, Paypal, WU.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours