Ultrasonic proximity sensor can replace the P+F brand model UB800-18GM40-E5-V1. Short design, 40 mm; Switch output; Program input.
Ultrasonic proximity sensor
Function indicators visible from all directions.
5 different output functions can be set.
Single head system
General specifications
Sensing range: 50...800 mm
Adjustment range: 70...800 mm
Unusable area: 0...50 mm
Standard target plate: 100 mm x 100 mm
Transducer frequencyapprox. 255 kHz
Response delayapprox. 100 ms
Indicators/operating means
LED greenPower on
LED yellowindication of the switching state
Flashing: Program function object detected
LED redsolid red: Error
Red, flashing: Program function, object not detected
Electrical specifications
Operating voltage: 10...30 V DC, ripple 10 %SS
No-load supply current: ≤ 20 mA
Input
Input type1 program input
Operating distance 1: -UB...+1 V, operating distance 2: +6 V...+UB
Input impedance: > 4, 7 kΩ Program pulse: ≥ 1 s
Output
Output type1 switch output E5, PNP NO/NC, programmable
Rated operational current200 mA, short-circuit/overload protected
Default settingSwitch point A1: 70 mm Switch point A2: 800 mm
Voltage drop≤ 3 V
Repeat accuracy≤ 1 %
Switching frequency≤ 4 Hz
Range hysteresis: 1 % of the set operating distance
Temperature influence: ± 1.5 % of full-scale value
Ambient conditions
Ambient temperature: -25...70 ° C (-13...158 ° F)
Storage temperature: -40...85 ° C (-40...185 ° F)
Mechanical specifications
Protection degree: IP67
ConnectionV1 connector (M12 x 1), 4-pin
Material
Housingbrass, nickel-plated
Transducerepoxy resin/hollow glass sphere mixture; Foam polyurethane, cover PBT
Dimension
Ultrasonic proximity sensor
Function indicators visible from all directions.
5 different output functions can be set.
Single head system
General specifications
Sensing range: 50...800 mm
Adjustment range: 70...800 mm
Unusable area: 0...50 mm
Standard target plate: 100 mm x 100 mm
Transducer frequencyapprox. 255 kHz
Response delayapprox. 100 ms
Indicators/operating means
LED greenPower on
LED yellowindication of the switching state
Flashing: Program function object detected
LED redsolid red: Error
Red, flashing: Program function, object not detected
Electrical specifications
Operating voltage: 10...30 V DC, ripple 10 %SS
No-load supply current: ≤ 20 mA
Input
Input type1 program input
Operating distance 1: -UB...+1 V, operating distance 2: +6 V...+UB
Input impedance: > 4, 7 kΩ Program pulse: ≥ 1 s
Output
Output type1 switch output E5, PNP NO/NC, programmable
Rated operational current200 mA, short-circuit/overload protected
Default settingSwitch point A1: 70 mm Switch point A2: 800 mm
Voltage drop≤ 3 V
Repeat accuracy≤ 1 %
Switching frequency≤ 4 Hz
Range hysteresis: 1 % of the set operating distance
Temperature influence: ± 1.5 % of full-scale value
Ambient conditions
Ambient temperature: -25...70 ° C (-13...158 ° F)
Storage temperature: -40...85 ° C (-40...185 ° F)
Mechanical specifications
Protection degree: IP67
ConnectionV1 connector (M12 x 1), 4-pin
Material
Housingbrass, nickel-plated
Transducerepoxy resin/hollow glass sphere mixture; Foam polyurethane, cover PBT
| Single head system | ||
| General specifications | ||
| Sensing range | 50...800 mm | |
| Adjustment range | 70...800 mm | |
| Unusable area | 0...50 mm | |
| Standard target plate | 100 mm x 100 mm | |
| Transducer frequency | approx. 255 kHz | |
| Response delay | approx. 100 ms | |
| Indicators/operating means | ||
| LED green | Power on | |
| LED yellow | indication of the switching state flashing: program function object detected | |
| LED red | solid red: Error red, flashing: program function, object not detected | |
| Electrical specifications | ||
| Operating voltage | 10...30 V DC, ripple 10 % SS | |
| No-load supply current | ≤ 20 mA | |
| Input | ||
| Input type | 1 program input operating distance 1: -U B...+1 V, operating distance 2: +6 V...+U B input impedance: > 4, 7 kΩ program pulse: ≥ 1 s | |
| Output | ||
| Output type | 1 switch output E5, PNP NO/NC, programmable | |
| Rated operational current | 200 mA, short-circuit/overload protected | |
| Default setting | Switch point A1: 70 mm Switch point A2: 800 mm | |
| Voltage drop | ≤ 3 V | |
| Repeat accuracy | ≤ 1 % | |
| Switching frequency | ≤ 4 Hz | |
| Range hysteresis | 1 % of the set operating distance | |
| Temperature influence | ± 1.5 % of full-scale value | |
| Ambient conditions | ||
| Ambient temperature | -25...70 ° C (-13...158 ° F) | |
| Storage temperature | -40...85 ° C (-40...185 ° F) | |
| Mechanical specifications | ||
| Protection degree | IP67 | |
| Connection | V1 connector (M12 x 1), 4-pin | |
| Material | ||
| Housing | brass, nickel-plated | |
| Transducer | epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT | |
Dimension