High temperature exhaust fan for fire fighting fan/blower

Product Details,Power:2-30KWRotating speed:2900r/minAir flow:970-6500m3/hTotal Pressure:3300-8500 PaColor:Red/White/Grey/Yellow/Blue/CustomizedCentrifugal FanIt can be used inlet air or outpurt air.Material is available according to ucstomer requirmentsCarbon steel,stainless steel,FRP,PP,PVC,etc.Can be customized according to cu

Featured Products

Product Details,
Power:2-30KW
Rotating speed:2900r/min
Air flow:970-6500m3/h
Total Pressure:3300-8500 Pa
Color:Red/White/Grey/Yellow/Blue/Customized
Centrifugal Fan
It can be used inlet air or outpurt air.
Material is available according to ucstomer requirments
Carbon steel,stainless steel,FRP,PP,PVC,etc.
Can be customized according to customer requirements
Explosion-proof fan
High temperature fan

High Temperature Smoke Exhaust Fan Blower for Firefight Fan/Blower
High Temperature Smoke Exhaust Fan Blower for Firefight Fan/Blower
Structure:
Impeller Type:Backward/Forward/radial blade
Driving Mode:Direct/belt//Coupling drive train
System Type:Single inlet type/Overhang type
Cooling type:Air cooling/Circulating Water cooling
Bearing Lubrication Methods:Grease lubricating/Oil bath lubrication
Motor Brand:ABB/Siemens/Baldor/Teco/Westinghouse Motor
Basic Components:Motor,Impeller,Impeller cone(Air Inlet),Case,Main shaft,Bearing,Bearing housing,Pin coupling,Foundation bolt.System monitoring instrument,Lube system,Overhead lube tank

High Temperature Smoke Exhaust Fan Blower for Firefight Fan/Blower
Befor placing an order,Please send us following parameters to help us to find the most suitable fan and blower for you,
1,Air Flow/Volume/Capacity
2,Pressure.
3,Power.
4,Voltage.
5,Frequency
6,Altitude of Operation Place

High Temperature Smoke Exhaust Fan Blower for Firefight Fan/Blower
Application Scopes,
1,Pulp and paper industry
2,The cement industry
3,The iron and steel industry
4,The coating industry
5,The chemical industry
6,Dust removal industry
SDF Series tunnel axial flow fans are specially designed for longitudinal ventilation of highway and railway tunnels and smoke control under emergency conditions,It can also be used for ventilation in similar tunnel and auxiliary tunnel engineering occasions.It is suitable for operation requirements at an altitude of 3500 meters.The axial fan can operate continuously in the environment of 025-50 ºC.In case of fire inside the tunne,it can be alowed to operate for a short time(not more than 1 hour) at 250 ºC.
This product is mainly used in tunnel ventilation system of highway,subway,mine,etc. for forced ventilation,suitable for all kinds of mining working face and local forced ventilation of all kinds of roadway.
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours