4-20mA Temperature Transmitter PT100 to 4-20mA Transmitter

4-20mA Temperature Transmitter PT100 to 4-20mA TransmitterISO Z-W-P-O Series Converter Characteristics:Three-wire, four-wire or two-wire PT100/Cu50 thermal resistance signal inputAccuracy, Linearization error grade: 0.2(Relative Temperature)Built-in linear processing and long-term compensation circuitIsolation Voltage: 3000VDC T

Featured Products

4-20mA Temperature Transmitter PT100 to 4-20mA Transmitter

ISO Z-W-P-O Series Converter Characteristics:
Three-wire, four-wire or two-wire PT100/Cu50 thermal resistance signal input
Accuracy, Linearization error grade: 0.2(Relative Temperature)
Built-in linear processing and long-term compensation circuit
Isolation Voltage: 3000VDC Three port: Input/power/output
Auxiliary Power Supply: 5V, 12V, 15V or 24VDC
International standard signal output: 4-20mA/0-5V/0-10V etc
Small size, low cost, easy use and high reliability
Standard DIP 24/SIP12 Pin, UL94V-0 package
Industrial temperature range: - 45º C~ + 85º C

Applications:
Temperature signal isolation, acquisition and transfer
Industry site high-precision temperature measure
Terminal resistance signal isolation and temperature control
Ground interference suppression
Temperature sensor signal converter to standard signal
Oil temperature measure and Alarm
Signal remote without distortion transmission
Power monitoring, medical equipment, temperature control isolation barrier

Summarize:
ISO W-Z Series RTD Thermal Resistanct to DC Current/Voltage Transmitter is a kind of mixed integrate circuits which integrates a set of isolated DC/DC converters, linearization disposal and long line compensation circuit, can bring two group of each other isolated power to input port for magnifying circuit, modulating circuit powered and output port demodulation. They can meet industrial wide temperature, humidity, shaky poor operation condition.
ISO W-Z Series temperatures signal isolation amplifier is very convenient, with minimal external components, can be realized Pt100 RTD signal isolation transmitter. And can achieve the industrial site temperature control signal into two, into four functions.

 Parameter Test Condition Min Typical MaxUnit 
 Isolated voltage 1Min  1500   3000  VDC
 Non-linearity(to temperature)   0.2 0.5 %FSR
 Output Voltage   5 10 V
 Output Current   20  mA
 Frequency response   10 mS
 Load capability(Voltage)  Vout=10V   2  KΩ
 Load capability(Current) Iout=20mA  500 650 Ω
 Signal output ripple No-filter  10  mV
 Output temperature drift   50  ppm/ºC
 Assistant power(Voltage) User-define 3.3 12 24 VDC
 Assistant power(Current) VD=12V  42  mA
 Power consumption  0.3 0.5 1 W
 Operating temperature  -45  85 ºC
 Storage temperature  -55  125 ºC

Packaging one : SIP 12PIN Packaging :
4-20mA Temperature Transmitter PT100 to 4-20mA Transmitter
4-20mA Temperature Transmitter PT100 to 4-20mA Transmitter
4-20mA Temperature Transmitter PT100 to 4-20mA Transmitter


Packaging two :  DIP 24PIN Packaging
4-20mA Temperature Transmitter PT100 to 4-20mA Transmitter
4-20mA Temperature Transmitter PT100 to 4-20mA Transmitter
4-20mA Temperature Transmitter PT100 to 4-20mA Transmitter


Packging three: DIN35 Rail-Mounted packaging

4-20mA Temperature Transmitter PT100 to 4-20mA Transmitter
4-20mA Temperature Transmitter PT100 to 4-20mA Transmitter
4-20mA Temperature Transmitter PT100 to 4-20mA Transmitter


4-20mA Temperature Transmitter PT100 to 4-20mA Transmitter

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours